生产性服务贸易自由化与制造业全球价值链的攀升

摘要基于世界银行STRD以及OECD投入产出数据,从价值链长度与位置视角探究生产性服务贸易自由化对制造业全球价值链的影响。研究发现:虽然生产性服务贸易自由化对制造业全球价值链地位表现出抑制作用,但是区分贸易方式后发现,抑制作用主要针对于加工贸易制造业;区分技术水平后发现,生产性服务贸易自由化对中低技术制造业表现出抑制作用,对高技术制造业没有显著影响;进一步研究表明,生产性服务贸易自由化通过压榨效应和技术依赖抑制全球价值链地位的提升。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	朱廷珺
	班元浩

关键词：生产性服务贸易自由化全球价值链地位价值链长度

Abstract： Based on the World Bank’s Service Trade Restriction Database and OECD input-output database, this paper studies the impact of production service trade liberalization on the global value chain of manufacturing industry from the perspective of the global value chain length and position. The study results indicate: Although the liberalization of trade in productive services shows a restraining effect on the manufacturing industry global value chain position, the restraining effect is mainly on the processing trade manufacturing industry, and it has a significant positive impact on the status of the non-processing trade manufacturing industry global value chain position. After distinguishing the technical level, it was found that the liberalization of productive service trade showed a restraining effect on low and medium tech manufacturing industry, and had no significant impact on high-tech manufacturing industry. Further studies show that the liberalization of producer services can restrain the promotion of global value chain status through squeezing effect and technology dependence effect.

Keywords： Productive Services Trade Liberalization Global Value Chain Position Length of Production

收稿日期 2020-03-22; 接受日期 ;

基金资助:国家社会科学基金西部项目(16XJL005);甘肃省社科规划项目(19YB002)

作者简介: 朱廷珺(1965— ),男,甘肃镇原人,博士,教授,主要从事世界经济、国际贸易研究;班元浩(1994— ),男,山东济宁人,博士研究生,主要从事世界经济、国际贸易研究。

引用本文:

朱廷珺, 班元浩.生产性服务贸易自由化与制造业全球价值链的攀升[J]. 经济经纬, 2020,6: 57-65

ZHU Tingjun, BAN Yuanhao.Productive Services Trade Liberalization and Manufacturing Industry Global Value Chain Upgrading[J] Economic Survey, 2020,V37(6): 57-65

链接本文:

http://www.jjjw.org.cn/CN/ 或 http://www.jjjw.org.cn/CN/Y2020/V37/I6/57

高觉民,李晓慧.2011.生产性服务业与制造业的互动机理:理论与实证[J].中国工业经济(6) :151-160.
黄永春,郑江淮,杨以文,等.2013.中国“去工业化”与美国“再工业化”冲突之谜解析:来自服务业与制造业交互外部性的分析[J].中国工业经济(3):7-19.
李小帆,马弘.2019.服务业FDI管制与出口国内增加值:来自跨国面板的证据[J].世界经济 (5):123-144.
刘斌,魏倩,吕越,等.2016.制造业服务化与价值链升级[J].经济研究 (3):151-162.
刘遵义,陈锡康,杨翠红,等.2007.非竞争型投入占用产出模型及其应用:中美贸易顺差透视[J].中国社会科学(5):91-103,206-207.
马盈盈.2019.服务贸易自由化与全球价值链:参与度及分工地位[J].国际贸易问题(7):113-127.
牛建国,张小筠.2019.全球价值链中的企业价值链功能升级[J].企业经济(10):130-139.
舒杏,王佳.2018.生产性服务贸易自由化对制造业生产率的影响机制与效果研究[J].经济学家(3):73-81.
唐卫红.2019.全球价值链视角下中国制造业升级契机选择[J].企业经济(10):139-146
杨高举,黄先海.2013.内部动力与后发国分工地位升级:来自中国高技术产业的证据[J].中国社会科学(2):25-45,204.
杨仁发,刘勤玮.2019.生产性服务投入与制造业全球价值链地位:影响机制与实证检验[J].世界经济研究(4):71-82,135.
杨青龙,吴倩.2018.“一带一路”国家的贸易便利化水平测算及评价[J].江淮论坛(2):50-56.
于明超,刘志彪,江静.2006.外来资本主导代工生产模式下当地企业升级困境与突破:以中国台湾笔记本电脑内地封闭式生产网络为例[J].中国工业经济(11):108-116.
张杰,郑文平.2017.全球价值链下中国本土企业的创新效应[J].经济研究 (3):151-165.
张艳,唐宜红,周默涵.2013.服务贸易自由化是否提高了制造业企业生产效率[J].世界经济 (11):51-71.
AMITI M,WEI S.2009.Service offshoring and productivity:Evidence from the US[J].World Economy,32(2):203-220.
ARNOLD J M,JAVORCIK B,LIPSCOMB M,et al.2016.Services reform and manufacturing performance:Evidence from India[J].Economic Journal,126(590):1-39.
BIRYUKOVA O,VOROBJEVA T.2017.The impact of service liberalization on the participation of BRICS countries in global value chains[J].International Organizations Research Journal,12(3):94-113.
FALLY T.2012.Production staging:Measurement and facts[Z].University of Colorado.
FERNANDES A M,PAUNOV C.2011.Foreign direct investment in services and manufacturing productivity:Evidence for Chile[J].Journal of Development Economics,97(2):0-321.
GEREFFI G,HUMPHREY J,STURGEON T.2005.The governance of global value chains[J].Review of International Political Economy,12(1):78-104.
HUMMELS D L,ISHII J,YI K.2001.The nature and growth of vertical specialization in world trade[J].Journal of International Economics,54(1):75-96.
KOOPMAN R,WANG Z,WEI S.2014.Tracing value-added and double counting in gross exports[J].American Economic Review,104(2):459-494.
WANG Z,WEI S,ZHU K.2013.Quantifying international production sharing at the bilateral and sector levels[Z].NBER Working Paper,No.19677.
WANG Z,WEI S,YU X,et al.2017.Characterizing global value Chains:Production length and upstreamness[Z].NBER Working Paper,No.23261.
ZHU S,FU X,LAI M,et al.2010.What drives the export sophistication of countries[Z].SLPTMD Working Paper,No.033.